overhead garage door springs installation

How Much Does it Cost to Replace Overhead Garage Door Springs?

When the rolling bay doors inside a commercial garage have ceased to function properly, it’s time to have the springs replaced. Most of us have never dealt with this situation before and will be wondering about the cost. Hopefully, this article can help you find out the cost to replace overhead garage door springs.

What is a Torsion Spring?

This is the spring that hangs above your roll-up door. It uses tension to open and close the door based on the weight of the door itself. Whether or not the door is open or closed, the amount of spring tension remains balanced.

Why Does it Need Replacing?

Some springs break due to material failure and metal fatigue. It may take several years for older springs to break, often more than 5-10 years. These springs are under a lot of torque, which means that the repeated cycles of opening and closing add wear and tear. Each torsion spring can be rated for a certain number of cycles before it needs to be replaced. They don’t last forever, but 10,000 cycles are an average lifetime.

Obviously, how often these springs are used will affect how long they last. The elements also affect garage door springs. If you live in an area where moisture is high, rust may develop. All in all, since the torsion spring is doing all the heavy lifting, sooner or later that spring will fail.

What is the Cost of a New Torsion Spring?

Now, it’s important to mention that not every industrial door is the same. They differ in size and weight. In addition, they may differ in how the torsion spring attaches to the garage door rod. On average, the cost will likely be in the range of $40-100 per spring. Since there are two, you’ll want to replace both at the same time. There will likely be an additional charge for an extension spring to be replaced.

What is the Total Cost of Replacement?

The garage door repair technician who comes to replace the overhead springs will be performing a service. So, the labor required for this service will be part of the cost to replace overhead garage door springs. The final cost can be $200-300 dollars for the work, plus the cost of the springs. In the end, you might be looking at somewhere around $250 to $450 to replace overhead garage door springs. It’s best to call a professional because they will often offer a warranty on their work. A professional also knows how to set the tension correctly, which is critical for a properly functioning overhead garage door.

Safety is another reason to call an expert. A professional technician will have the knowledge and experience to install new tension springs properly. For the best service, contact us. At Frontier Pacific, we specialize in overhead garage door maintenance, replacement, and repair. Contact us by phone or online. We look forward to hearing from you!